The rear shock on the full suspension e-bike Outback is set by default at 135-140 psi and for Enduro is 125-130 which is optimal for rider at around 200lbs. Please note that in order to change the pressure on the shock you will need high pressure ...
The rear shock on the full suspension e-bike Outback is set by default at 135-140 psi and for Enduro is 125-130 which is optimal for rider at around 200lbs. Please note that in order to change the pressure on the shock you will need high pressure ...
Power Button Plastic Top Cap replacement For all Voltbike models Tools/ parts required: Small Phillips screwdriver 2.5mm hex too Power ‘off’ the bike and remove the battery. Use a 2.5mm hex tool to uninstall the power button from the handlebar. Use a ...
We at Voltbike appreciate and support our customers and want everyone to enjoy their Voltbikes for years to come. We offer a few different channels of support such as: Email: sales@voltbike.com Definitely the quickest and best way to get any problem ...
The rear shock on Outback is set by default at 135-140 psi and Enduro is 125-130 which is optimal for rider at around 200lbs. Please note that in order to change the pressure on the shock you will need high pressure shock pump. You won't be able to ...
Installing your pedals properly is an important step. Failure to properly install your pedals may result in damage to either your pedal crank or your pedal. Please watch our bike mechanic below with instruction how to do this. ...
Your order will be reserved on our website with paypal or a credit card, but the money will not be deducted from your account right away. It will take a few days for the payment to be approved. VoltBike will only charge you when we are ready to ship ...