How do I install the internal wedge mirror?

How do I install the internal wedge mirror?

Handlebar Mirror Install: Internal Wedge mirror

Tools & Parts required:
3 mm hex key (not supplied)
mirror
end cap
M4 x 50mm - socket cap head bolt
M4 square threaded nut
small hex wedge(16mm diameter)
small nut wedge
or
large hex wedge (18mm diameter)
large nut wedge

Install:
Remove the LH side bar plug and determine the internal wedge size to use by checking the inside diameter of the handlebar.

With the end cap removed and mirror arm orientated forward, install the M4 bolt through the arm mount and the hex wedge. Ensure the hex wedge is fitted to the hex interface.

Slide the M4 square threaded nut into the slot of the plastic nut wedge.

Position the wedge, and thread it on to the bolt. Tighten the bolt so the two wedges come together.

Slide the mirror wedge assembly into the end of the handlebar.

Tighten the bolt so the wedges begin to hold inside the handlebar. Position the arm and mirror so the rider has good rear visibility. Once in the correct position, tighten the bolt and secure the mirror arm in place. The Mirror arm should be tight but still move to allow for easy adjustments.

Re-insert the end cap and test ride.


    • Related Articles

    • How do I install the internal wedge mirror?

      Handlebar Mirror Install: Internal Wedge mirror Tools & Parts required: 3 mm hex key (not supplied) mirror end cap M4 x 50mm - socket cap head bolt M4 square threaded nut small hex wedge(16mm diameter) small nut wedge or large hex wedge (18mm ...

    • Lock-Out Top Cap Fix for Suntour Suspension Forks

      Tools required: Small flat screwdriver 5mm hex tool 4mm hex tool Needle nose pliers Your new Voltbike may have a Suntour front suspension fork that has a dual-position lock-out dial on the RH side that allows the rider to open and lock the suspension ...

    • The lock-out on my Suntour fork is not working. How do I fix it?

      Lock-Out Top Cap Fix for Suntour Suspension Forks For VoltBike Models: Bravo Elegant Tools Required: Small Flathead Screwdriver 5mm Hex Tool 4mm Hex Tool Needle Nose Pliers Your new Voltbike may have a Suntour front suspension fork that has a dual ...

    • Front rack installation

      In this video, we cover how to install a front rack to the headset of your VoltBike

    • Pedal installation on your new VoltBike

      Installing your pedals properly is an important step. Failure to properly install your pedals may result in damage to either your pedal crank or your pedal. Please watch our bike mechanic below with instruction how to do this. ...