How to adjust mechanical disc brakes on your VoltBike

How to adjust mechanical disc brakes on your VoltBike

In this video, you going to learn how to adjust the mechanical disc brakes on our VoltBike. At this moment we use mechanical disc brakes Tektro on most of our models. If your VoltBike is using Tektro disc brakes then this video is for you.


    • Related Articles

    • How to adjust rear derailleur on your VoltBike

      In this video, we are going to show you how to adjust the rear derailleur on your VoltBike. You will learn how to use limiting screws and how to fine-tune your gear shifting system. This technique should work for most Shimano rear derailleurs on the ...
    • How to adjust folding latch on VoltBike Urban

      After some time, it is possible that the folding points on your VoltBike Urban may become loose. It is important to check them on a regular basis and make sure that they are tight and firm. In this video, we going to show you how to adjust the ...
    • Degreasing brake rotors on VoltBike to eliminate noise when stopping

      This video will walk you through the steps of degreasing disc brake rotors on VoltBike Yukon or other VoltBike models using hydraulic disc brakes. This procedure is required only if you experience noise when stopping the bike.
    • Replacing brake sensor (power cut off inhibitor) on Tektro hydraulic brakes

      In this video, you can learn how to replace a brake sensor and adjust brake lever travel. An important step here is to remove the set screw first before trying to remove the brake sensor. Attempting to remove the sensor without releasing the set ...
    • Replacing brake sensor (power cut off inhibitor) on Tektro hydraulic brakes

      In this video, you can learn how to replace a brake sensor and adjust brake lever travel. An important step here is to remove the set screw first before trying to remove the brake sensor. Attempting to remove the sensor without releasing the set ...