LCD Screen settings for VoltBike Urban

LCD Screen settings for VoltBike Urban

The settings below are for the latest VoltBike Urban 2018/2019 edition with S.Widom LCD screen panel. Please note that those settings are not compatible for the previous generations.

P01：LCD backlight brightness. Default is 2.
P02：Switch between KM and Miles, 0:KM; 1:MILE；
P03：Voltage rating: 24V, 36V, 48V. Default is 36.
P04：Sleep time. Default is 0.
P05：Pedal assist level range. Default is 5.
P06: Wheel diameter in inches. Default is 20.
P07: Speed magnetic steel number. Default is 6.
P08：The speed limit：Range 0-50km/h，Default 50.
P09：Throttle activation 0：activate from dead stop；1：Activate after gain speed；Default 0.
P11：Power sensitivity setting Range：1-24；Default 1;
P12：Booster starting strength setting Range：0-5；Default 5
P13：Magnetic sensors on the pedal assist plate. Default 12.
P14：Controller amperage setting. Default 12.
P15：Turn speed duty ratio setting Range：0-100. Default 100.
P16: Default 0
P99: Default 99
ODO: Default 5

    • Related Articles

    • LCD screen and keypad replacement

      LCD screen and keypad replacement Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts ...

    • LCD screen and keypad replacement

      Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts (x2) for mounting LCD to bracket • ...

    • How do I remove my LCD screen?

      LCD replacement This article covers how to replace the LCD and control keypad, should either of them require replacement due to damage or malfunction. The LCD is permanently connected to the keypad. The LCD circuitry is potted to seal it from ...

    • How to adjust folding latch on VoltBike Urban

      After some time, it is possible that the folding points on your VoltBike Urban may become loose. It is important to check them on a regular basis and make sure that they are tight and firm. In this video, we going to show you how to adjust the ...

    • Battery LCD Replacement

      In this video we are going to show how to replace the LCD display on your VoltBike battery. This video applies only to the clip-on style battery found on the VoltBike Yukon, Bravo, Elegant, Enduro, Outback, Nitro, and Kodiak