Light Harness Replacement | VoltBike Instructional

Light Harness Replacement | VoltBike Instructional



In this video we are going to showover how to replace your front light cable and/or the main power harness.


    • Related Articles

    • LCD screen and keypad replacement

      LCD screen and keypad replacement Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts ...
    • LCD screen and keypad replacement

      Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts (x2) for mounting LCD to bracket • ...
    • Battery Fuse Replacement (Clip-On Style Battery) - VoltBike

      In this video we are going to show the procedure for replacing the fuse inside a clip-on style battery. This applies to any VoltBike using the clip-on style batteries, including the Yukon, Bravo, Elegant, Outback, Enduro, Nitro, and Kodiak.
    • Installing a replacement controller on Voltbike rear hub

      This video will walk you through the steps of replacing a controller on VoltBike Yukon 2018/2019 and future models. Before you start, make sure that you remove the battery to make sure there is no accidental activation of the motor or any of the ...
    • Inner tube replacement on VoltBike Yukon 750