Motor core replacement, planetary gears and speed sensor replacement

Motor core replacement, planetary gears and speed sensor replacement


In this video we are showing how to open and replace motor core Bafang for VoltBike. Learn about planetary gears and how to maintain or replace them. Learn about speed sensor and how the e-bikes are measuring speed.

    • Related Articles

    • Replacing nylon gears on a Bafang hub motor

      If you experience consistent grinding noise coming from the rear hub then it's possible that the motor gears need to be replaced. This is a relatively rare issue and if it happens is usually after the first year of ownership. The video below shows ...

    • Adjusting Brake Inhibitor Sensor, Error 05E

      VoltBike electric bikes comes standard with feature which cuts the power to the motor when the brake lever is engaged. The brake cut inhibitor is located in the brake lever and it consist of sensor and magnet. In this video you will learn how to ...

    • LCD screen and keypad replacement

      LCD screen and keypad replacement Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts ...

    • LCD screen and keypad replacement

      Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts (x2) for mounting LCD to bracket • ...

    • Replacing brake sensor (power cut off inhibitor) on Tektro hydraulic brakes

      In this video, you can learn how to replace a brake sensor and adjust brake lever travel. An important step here is to remove the set screw first before trying to remove the brake sensor. Attempting to remove the sensor without releasing the set ...