What is the air pressure setting on the rear shocks ?

• Related Articles

• What is the air pressure setting in the rear shocks on the Outback and Enduro

  The rear shock on the full suspension e-bike Outback is set by default at 135-140 psi and for Enduro is 125-130 which is optimal for rider at around 200lbs. Please note that in order to change the pressure on the shock you will need high pressure ...

• What is the air pressure setting in the rear shocks on the Outback and Enduro

  The rear shock on the full suspension e-bike Outback is set by default at 135-140 psi and for Enduro is 125-130 which is optimal for rider at around 200lbs. Please note that in order to change the pressure on the shock you will need high pressure ...

• How to adjust rear derailleur on your VoltBike

  In this video, we are going to show you how to adjust the rear derailleur on your VoltBike. You will learn how to use limiting screws and how to fine-tune your gear shifting system. This technique should work for most Shimano rear derailleurs on the ...

• Installing a replacement controller on Voltbike rear hub

  This video will walk you through the steps of replacing a controller on VoltBike Yukon 2018/2019 and future models. Before you start, make sure that you remove the battery to make sure there is no accidental activation of the motor or any of the ...

• Voltbike Outback 2023 Overview - Full suspension electric bike with RockShox suspension

  In this video, Jason goes over what's new with the latest 2023 edition full suspension electric bike VoltBike Outback. This bike now comes with RockShox rear air suspension, ball bearing rear triangle linkage, 3.5" color LCD screen with USB port, ...