Yukon
Replacing brake sensor (power cut off inhibitor) on Tektro hydraulic brakes
In this video, you can learn how to replace a brake sensor and adjust brake lever travel. An important step here is to remove the set screw first before trying to remove the brake sensor. Attempting to remove the sensor without releasing the set ...
What is the crankarm specification for the 2018/2019 VoltBike Yukon and Bravo
The VoltBike Yukon and Bravo currently use a forged Aluminium Prowheel Pioneer square taper crankset. Length 170mm / 4 bolt x 104mm bolt circle diameter / 44 tooth chainring / 9/16" pedal thread.
LCD screen and keypad replacement
LCD screen and keypad replacement Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts ...
Freewheel removal - over sized motor plug
In the past, some models of the Yukon came with an oversized power chord plug for the hub motor which restricted the ability to use a standard freewheel removal tool. This article covers the process of removing the freewheel on such Yukons. Tools ...