Battery LCD Replacement

Battery LCD Replacement



In this video we are going to show how to replace the LCD display on your VoltBike battery. This video applies only to the clip-on style battery found on the VoltBike Yukon, Bravo, Elegant, Enduro, Outback, Nitro, and Kodiak

    • Related Articles

    • LCD screen and keypad replacement

      LCD screen and keypad replacement Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts ...

    • LCD screen and keypad replacement

      Tools Required: • 3mm hex tool • 2.5mm hex tool Parts: The replacement LCD will include the following: • LCD with attached keypad • LCD mounting bracket • rubber shims (not needed for 31.8mm handlebars) • 4mm bolts (x2) for mounting LCD to bracket • ...

    • How do I remove my LCD screen?

      LCD replacement This article covers how to replace the LCD and control keypad, should either of them require replacement due to damage or malfunction. The LCD is permanently connected to the keypad. The LCD circuitry is potted to seal it from ...

    • Battery Fuse Replacement (Clip-On Style Battery) - VoltBike

      In this video we are going to show the procedure for replacing the fuse inside a clip-on style battery. This applies to any VoltBike using the clip-on style batteries, including the Yukon, Bravo, Elegant, Outback, Enduro, Nitro, and Kodiak.

    • How do I replace the button cover cap for my LCD screen?

      ower Button Plastic Top Cap replacement For all Voltbike models Tools/ parts required: Small Phillips screwdriver 2.5mm hex too Power ‘off’ the bike and remove the battery. Use a 2.5mm hex tool to uninstall the power button from the handlebar. Use a ...