If you experience consistent grinding noise coming from the rear hub then it's possible that the motor gears need to be replaced. This is a relatively rare issue and if it happens is usually after the first year of ownership.
The video below shows how to open the motor and replace the gears. VoltBike do have those gears available.
The video below shows how to detach gears from motor Bafang.
In this video we are showing how to open and replace motor core Bafang for VoltBike. Learn about planetary gears and how to maintain or replace them. Learn about speed sensor and how the e-bikes are measuring speed.
In the past, some models of the Yukon came with an oversized power chord plug for the hub motor which restricted the ability to use a standard freewheel removal tool. This article covers the process of removing the freewheel on such Yukons. Tools ...
In the past, some models of the Yukon came with an oversized power chord plug for the hub motor which restricted the ability to use a standard freewheel removal tool. This article covers the process of removing the freewheel on such Yukons. Tools ...
This video will walk you through the steps of replacing a controller on VoltBike Yukon 2018/2019 and future models. Before you start, make sure that you remove the battery to make sure there is no accidental activation of the motor or any of the ...
In this video, we will provide a basic overview of the operation of our rear-hub motor electric bikes, including the Yukon, Bravo, Elegant, Mariner, and Outback models